home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Magnum One
/
Magnum One (Mid-American Digital) (Disc Manufacturing).iso
/
d1
/
error.arc
/
IBM.TXT
next >
Wrap
Text File
|
1989-06-13
|
14KB
|
360 lines
Page 1 of 7
Error Codes For The IBM PC/XT
01X Undetermined problem errors
02X Power Supply errors
1XX System board errors
101 System board error - Interrupt failure
102 System board error - Timer failure
103 System board error - Timer interrupt failure
104 System board error - Protected mode failure
105 System board error - Last 8042 command not accepted
106 System board error - Converting logic test
107 System board error - Hot NMI test
108 System board error - Timer bus test
109 DMA test error
121 Unexpected hardware interrupt occurred
131 Cassette wrap test failed
161 System options error - (Run setup - Battery failure)
162 System options not setup correctly - (Run setup)
163 Time and date not set - (Run setup)
164 Memory size error - (Run setup)
199 User indicated configuration not correct
2XX Memory (RAM) errors
201 Memory test failed
202 Memory address error
203 Memory address error
3XX Keyboard errors
301 Keyboard did not respond to software reset correctly
or a stuck key failure was detected. If a stuck key
was detected, the scan code for the key is displayed
in hex. For example, the error code 49 301 indicates
that key 73, the PgUp key has failed. (49Hex = 73Dec)
302 User indicated error from the keyboard test or AT
system unit keylock is locked.
303 Keyboard or system unit error
304 Keyboard or system unit error, CMOS doesn't match system
4XX Monochrome monitor errors
401 Monochrome memory test, horizontal sync. freq. test, or
video test failed
408 User indicated display attributes failure
416 User indicated character set failure
424 User indicated 80 X 25 mode failure
432 Parallel port test failed (monochrome adapter)
Page 2 of 7
5XX Color monitor errors
501 Color memory test, horizontal sync. freq. test, or video
test failed
508 User indicated display attribute failure
516 User indicated character set failure
524 User indicated 80 X 25 mode failure
532 User indicated 40 X 25 mode failure
540 User indicated 320 X 200 graphics mode failure
548 User indicated 640 X 200 graphics mode failure
6XX Diskette drive error
601 Diskette power on diagnostics test failed
602 Diskette test failed - boot record is not valid
606 Diskette verify function failed
607 Write protected disk
608 Bad command diskette status returned
610 Diskette initialization failed
611 Timeout - diskette status returned
612 Bad NEC - diskette status returned
613 Bad DMA - diskette status returned
621 Bad seek - diskette status returned
622 Bad CRC - diskette status returned
623 Record not found - diskette status returned
624 Bad address mark - diskette status returned
625 Bad NEC seek - diskette status returned
626 Diskette data compare error
7XX 8087 or 80287 math co-processor errors
9XX Parallel printer adapter errors
901 Parallel printer adapter test failed
10XX Reserved for parallel printer adapter
11XX Async. communication adapter errors
1101 Async. communication adapter test failed
12XX Alternate async communication adapter errors
1201 Alternate async communication adapter test failed
13XX Game control adapter errors
1301 Game control adapter test failed
1302 Joy-stick test failed
14XX Printer errors
1401 Printer test failed
1404 Matrix printer failed
Page 3 of 7
15XX Synchronous data link control (SDLC) communication
adapter failed
1510 8255 port B failure
1511 8255 port A failure
1512 8255 port C failure
1513 8253 timer 1 did not reach terminal count
1514 8253 timer 1 stuck on
1515 8253 timer 0 did not reach terminal count
1516 8253 timer 0 stuck on
1517 8253 timer 2 did not reach terminal count
1518 8253 timer 0 stuck on
1519 8273 port B error
1520 8273 port A error
1521 8273 command/read timeout
1522 Interrupt level 4 failure
1523 Ring indicate stuck on
1524 Receive clock stuck on
1525 Transmit clock stuck on
1526 Test indicate stuck on
1527 Ring indicate not on
1528 Receive clock not on
1529 Transmit clock not on
1530 Test indicate not on
1531 Data set ready not on
1532 Carrier detect not on
1533 Clear to send not on
1534 Data set ready stuck on
1536 Clear to send stuck on
1537 Level 3 interrupt failure
1538 Receive interrupt results error
1539 Wrap data miscompare
1540 DMA channel 1 error
1541 DMA channel 1 error
1542 Error in 8273 error checking or status reporting
1547 Stray interrupt level 4
1548 Stray interrupt level 3
1549 Interrupt presentation sequence timeout
16XX Display emulation errors (327X, 5520, 525X)
17XX Fixed disk errors
1701 Fixed disk POST error
1702 Fixed disk adapter error
1703 Fixed disk drive error
1704 Fixed disk adapter or drive error
1780 Fixed disk 0 failure
1781 Fixed disk 1 failure
1782 Fixed disk controller failure
1790 Fixed disk 0 error
1791 Fixed disk 1 error
Page 4 of 7
18XX I/O expansion unit error
1801 I/O expansion unit POST error
1810 Enable/Disable failure
1811 Extender card wrap test failed (disabled)
1812 High order address lines failure (disabled)
1813 Wait state failure (disabled)
1814 Enable/Disable could not be set on
1815 Wait state failure (disabled)
1816 Extender card wrap test failed (enabled)
1817 High order address lines failure (enabled)
1818 Disable not functioning
1819 Wait request switch not set correctly
1820 Receiver card wrap test failure
1821 Receiver high order address lines failure
19XX 3270 PC attachment card errors
20XX Binary synchronous communications (BSC) adapter errors
2010 8255 port A failure
2011 8255 port B failure
2012 8255 port C failure
2013 8253 timer 1 did not reach terminal count
2014 8253 timer 1 stuck on
2016 8253 timer 2 did not reach terminal count or is stuck on
2017 8251 Data set ready failed to come on
2018 8251 Clear to send not sensed
2019 8251 Data set ready stuck on
2020 8251 Clear to send stuck on
2021 8251 Hardware reset failed
2022 8251 Software reset failed
2023 8251 Software "error reset" failed
2024 8251 Transmit ready did not come on
2025 8251 Receive ready did not come on
2026 8251 Could not force "overrun" error status
2027 Interrupt failure - no timer interrupt
2028 Interrupt failure - transmit, replace card or planar
2029 Interrupt failure - transmit, replace card
2030 Interrupt failure - receive, replace card or planar
2031 Interrupt failure - receive, replace card
2033 Ring indicate stuck on
2034 Receive clock stuck on
2035 Transmit clock stuck on
2036 Test indicate stuck on
2037 Ring indicate stuck on
2038 Receive clock not on
2039 Transmit clock not on
2040 Test indicate not on
2041 Data set ready not on
2042 Carrier detect not on
2043 Clear to send not on
2044 Data set ready stuck on
2045 Carrier detect stuck on
2046 Clear to send stuck on
Page 5 of 7
2047 Unexpected transmit interrupt
2048 Unexpected receive interrupt
2049 Transmit data did not equal receive data
2050 8251 detected "overrun" error
2051 Lost data set ready during data wrap
2052 Receive timeout during data wrap
21XX Alternate binary sync. communication adapter error
2110 8255 port A failure
2111 8255 port B failure
2112 8255 port C failure
2113 8253 timer 1 did not reach terminal count
2114 8253 timer 1 stuck on
2115 8253 timer 2 did not reach terminal count or is stuck on
2116 8251 data set ready failed to come on
2117 8251 clear to send not sensed
2118 8251 data set ready stuck on
2119 8251 clear to send stuck on
2120 8251 Hardware reset failed
2121 8251 Software reset failed
2122 8251 Software "error reset" failed
2123 8251 Transmit ready did not come on
2124 8251 Receive ready did not come on
2125 8251 Could not force "overrun" error status
2126 Interrupt failure - no timer interrupt
2128 Interrupt failure - transmit, replace card or planar
2129 Interrupt failure - transmit, replace card
2130 Interrupt failure - receive, replace card or planar
2131 Interrupt failure - receive, replace card
2133 Ring indicate stuck on
2134 Receive clock stuck on
2135 Transmit clock stuck on
2136 Test indicate stuck on
2137 Ring indicate stuck on
2138 Receive clock not on
2139 Transmit clock not on
2140 Test indicate not on
2141 Data set ready not on
2142 Carrier detect not on
2143 Clear to send not on
2144 Data set ready stuck on
2145 Carrier detect stuck on
2146 Clear to send stuck on
2147 Unexpected transmit interrupt
2148 Unexpected receive interrupt
2149 Transmit data did not equal receive data
2150 8251 detected "overrun" error
2151 Lost data set ready during data wrap
2152 Receive timeout during data wrap
22XX Cluster adapter errors
24XX Enhanced graphics adapter errors
Page 6 of 7
26XX XT/370 error code
27XX XT/370 error code
29XX Color matrix printer errors
2901
2902
2904
30XX Primary PC network adapter error
3001 CPU failure
3002 ROM failure
3003 ID failure
3004 RAM failure
3005 HIC failure
3006 +/- 12V failed
3007 Digital loopback failed
3008 Host detected HIC failure
3009 Sync. fail & no go bit
3010 HIC test OK & no go bit
3011 Go bit & no CMD 41
3012 Card not present
3013 Digital failure (fall thru)
3015 Analog failure
3041 Hot carrier (not this card)
3042 Hot carrier (this card)
31XX Secondary PC network adapter error
3101 CPU failure
3102 ROM failure
3103 ID failure
3104 RAM failure
3105 HIC failure
3106 +/- 12V failed
3107 Digital loopback failed
3108 Host detected HIC failure
3109 Sync. fail & no go bit
3110 HIC test OK & no go bit
3111 Go bit & no CMD 41
3112 Card not present
3113 Digital failure (fall thru)
3115 Analog failure
3141 Hot carrier (not this card)
3142 Hot carrier (this card)
33XX Compact printer errors
Page 7 of 7
Audio Codes
No beep, continous beep, or repeating Power supply
short beeps
1 long beep and 1 short beep System board
1 long beep and 2 short beeps Monitor adapter card
1 short beep and blank or incorrect Monitor cable and/or
display display
1 short beep and either the drive Drive and/or drive
LED staying on or Personal Computer adapter card
BASIC statement